straightening-rolls

ROLLS FOR STRAIGHTENING

Straightening Rolls/ Hyperbolic Rolls are employed to straighten lengths of metal stock of circular cross-section like steel rods, pipes, sections & rails. The straightening rolls are made from forged steel which have a high hardness & wear resistance with the lowest possible tendency to pick-up. Rolls are designed for extreme conditions such as high speed[…]

cross-section-roll

ROLLS FOR CROSS SECTION

KS Roll Craft manufactures a variety of rolls for cross-section profiles to regular cylindrical, square and rectangular tubes. Each profile requires a carefully crafted set of rolls. Designing of the rolls start with a flower pattern, this is a sequence of profile cross-sections, one for each stand of rolls. The roll contours are then derived[…]

slitting_cutters

SLITTING CUTTERS

Application : Used for slitting & trimming mild steel, Stainless steel, Aluminum, brass and Copper. Material Grades : D2, D3, H11, H13, HSS, S1, S2, SR4, 1.2767, High Speed slitters for foils, Tungsten Carbide Characteristics : Longer life between regrinding. Sharp uniform shearing edge after regrind. Low downtime-high productivity. We also manufacture precision cutting tools[…]

cutting_saws

TUBE CUTTING SAWS

Application : Tube cutting saws are used to cut tubes Material Grades : M2 Characteristics :  Saws are manufactured with various tooth profiles. In sawing application, the pitch and therefore the number of teeth are critical. Too few or too large teeth may induce vibration resulting in tooth & saw breakage. These are offered in various coatings[…]

tube_cut

TUBE CUT OFF/ALFA SHEAR

Application : Tube cut off or Alfa Shears are used to cut the Tubes. Machine : Tube Cutting Machine Material Grades : D2, M2 Characteristics : The high speed steel offers increased blade life, strength & flatness. We offer a wide range of coatings like TiN, TiCN, CrN, TiAIN etc to increase production & reduce scrap. Complementing the tube[…]

tools

SEPARATOR DISCS

Application : Separator Discs are used to maintain distance between slits. Machine : Slitting machines Material Grades : 52100, EN9, Spring Steel. Characteristics : We offer single/double bevel angle and various thickness. Available to a maximum hardness of 58/60 Rockwell, steel separator discs are made from the finest steel and guarantee a long-lasting, dependable performance[…]

separator_discs

RUBBERIZED SPACERS

Application : Rubberized Spacers and Stripper Rings are used with cutter to give space between cutters. Machine : Slitting machines Material Grades : For ID Material: EN31, EN9 For OD Material: Polyurethane and Nitrile Characteristics : To ease assembly and removal of tools, we offer Split design. The spacers can also be lapped to the highest level of precision. Bonded[…]

rotary_cut

ROTARY CUT OFF/COC CUTTERS

Application : Rotary Cutters are suitable for cutting all types of round metal including copper, brass, steel, aluminum, Stainless and Titanium. Machine : Tube Cutting Machine Material Grades : D2, H13, H11, M2, 1.2767, EN24, S7 Characteristics : Cut all the way through displacing, not removing material, therefore resulting in a chipless cut with a minimum burr. These cutters[…]

spacers

METAL SPACERS

Application : Spacers are used on Arbor shift with cutters and on over arm shaft with Discs. Machine : Slitting machines Material Grades :EN31, EN9 Characteristics : Atlas offers light weight and also Ultra light weight spacers which are nearly 65-70% lighter than the conventional steel spacer. This makes the job of the operator easier and causes less[…]

forming_rolls

FORMING ROLLS

Application : These Rolls are used in Tube forming Industry to form different sizes of tubes. Types of Rolls:  Breakdown Rolls Forming Rolls Fin pass Rolls Welding Rolls Sizing Rolls Turk’s Head Rolls Material Grades : D3, D2, H13, EN31, H11, Special steel grades & tungsten carbide Characteristics: Ksroll Craft Engineers designs & manufactures entire range of forming[…]